MyPSC

please dont double post, use the edit button on the top right of your posts.
nope dong-a pens are completely not available in malaysia.

okay,...
@BloorA:
actually i didnt understand also what you really means???
'tips for hollowing namae cap?'
or you mean what??
and 'how does the inktube stick out?'????
haha...sorry i didnt get that...
or you mean how i make the inktube????

no, i mean how to take out the 'thing' inside the cap? lol if you get what i mean

oh, you mean the 'thing' that sticks with the tips???
i cant redone it because i dont want to make another one..
haha...my mistake....i take out the 'thing' by removing
the small plastic that sticked with the 'thing'....
ahhh susahlah...kita kata 'thing' itu 'Namae's Back Plug'..ok?
actually its hard to say becuz i cant show it...the best
way is you buy the namae's first...okay, i told what i can...
look at these pict:


okay,from this pict you see it have a vision from inside, side, and a real
namae cap....
okay, first look at the inside one:


here, you see the red colour right???its the outer layer,
and the blue and the black is the inner layer....
you can see some hole between the blue colour.
there, you need to cut it until the black and the blue
colour is seperated...
seeing it from the side:


and the black region is the thing that you need to take out
and tipped it with signo's...
it will look like this:


now you get it BloorA???
if you still dont get it, dunno what to say...
and what is the other thing that you didnt really clear???

haha very detailed. nice drawings, sorry to trouble you. but still, how do you remove the blue part?

okay,...
now i want you to look at the side pict....
okay, actually the blue and red part is one layer,
you get what i mean???so the divider is the
black one,...i make it like this to make you more
understand and easier which part you need to take off...
okay, first open the picture, then you will
see the gap between the blue and black region...
that part is NOT stick together...
then, how to take it off is you will see at the
end of the gap some thin lining...not the red one,
but the blue one.,and you will see also line that
across the black region...
so, the part that has been lined is the part that
you need to cut so that the blue and black part
is completely seperated...the result is the
back plug in pict 4..
from the place that you cut,it will left a some cut
mark and it will disturb the movement...
so that place is the part that you need to file...
okay???and sorry for late post

CainGraywood wrote:actually, i'm selling namae's....haha
but if you want to find it on your own,...
you should find 'Daiso'..haha

do you still have the namae's pens?
i already go to daiso@the curve there no sell namae pen...
but i found sailor gel

yeah...i can get it for u..^_^
pm...